Price: 135.00 USD
The Silent Antminer System – Model 6″ Complete System with Ducts and Adapter
Custom-Made Antminer Noise Insulation / Reduction System
The system includes:
1) Acoustic Box (1x)
2) Insulated exhaust (1x) duct (5 foot long)
3) Insulated intake (1x) duct (5 foot long)
4) Custom 3D-printed exhaust Duct adapter (1X)
*** Please note *** This system will not work with the new S19jPro as it is too long. Please see the extra long system we offer: The Silent Crypto Currencies Antminer System Extra Large – Model 6″
Reduction in noise allows having several ASICs in the same room without suffering significant noise.
Noise may further be reduced in a cool environment (air-conditioned room).
No permanent modification to your miner.
The provided duct adapter is attached to the miner with existing screws.
The provided intake duct is inserted directly into the box.
The provided exhaust duct fits right around the duct-adapter (provided). You may choose to secure the duct with tape or a zip-tie, but this is not necessary.
Please indicate the type of adapter you require during checkout (leave a note to seller).
Version 4″ (https://www.ebay.com/itm/294083315873) is suited for miners with a single fan on each end.
Version 6″ extra long (https://www.ebay.com/itm/294401050217) is suited for the new line of miners S19jPro, and beyond.
* Significant Noise Reduction (Depends on the Equipment used and its configuration)
*** Additional ducts and adapters may be purchased from us. Please see our other items, or contact us for more information.
**** The color of some components may vary based on availability.
Due to the nature of mining, all sales are final, no returns. Please send a message BEFORE Purchasing if you have any questions.
Greetings potential customer (soon to be one 🙂 )
The set up is straight forward and should take a few minutes to complete. The adapter is attached to the exhaust side of the miner and connected to a duct through the exhaust side of the system. The intake fan/s on the miner remain as is. The second duct is then attached to the intake side of the system but is not connected to the miner. This duct provides all the air the miner needs. The miner pulls the air from the box, transfers it through the hash boards and out through the adapter and exhaust duct.
From tests I performed in the past, I managed to reduce the noise from over 80db to around 60db. A key for the systems I build is the insulated ducts that further reduce the noise.
Please don’t hesitate to ask any and all questions,
I’m here to help