Bitmain APW3++ 1600W Power Supply 110/220 APW3 PSU Antminer S9 L3+ D3 A3 S7 Z9

Bitmain APW3++ 1600W Power Supply 110/220 APW3 PSU Antminer S9 L3+ D3 A3 S7 Z9

antminer
item image

Price: 119.00 USD

Crypto Miner:

Bitmain APW3++ 1600W Power Supply 110/220 APW3 PSU Antminer S9 L3+ D3 A3 S7 Z9

1. The power cord is not included,

2. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.

Output

  • DC Voltage: 12.15V
  • Rated Current(220V input): 133A
  • Rated Current(110V input): 100A
  • Rated Power(220V input): 1600W
  • Rated Power(110V input): 1200W
  • Ripple & Noise: <1%
  • Voltage Regulation: <2%
  • Load Regulation: <1%
  • Source Regulation: <1%
  • Setup, Rise Time: <2S
  • Power off Protection Trip Time:>9mS
  • Interface Type: 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)
  • Noise Level: <43DB

Input

  • Voltage Range:100-240V AC
  • Starting Voltage: 95-105V AC
  • Frequency Range: 47-63Hz
  • Power Factor: >0.95 (full load)
  • Leakage Current: <1.5mA (220V 50Hz)

Protection

  • Low-voltage Input:80-89V AC
  • Output Short Circuit:Yes
  • Output Overcurrent:134-185A max.
  • Overheat Protection:Yes
  • Operating Temperature:-20°C – 50°C
  • Operating Humidity:20% – 90% relative humidity (non-condensing)
  • Dimensions:220mm*108mm*62mm
  • Cooling:Forced-air cooling

0/5 (0 Reviews)

Leave a Reply

Your email address will not be published.