12dbi Helium Hotspot Miner Antenna 10FT Cable For RAK Nebra Bobcat 915Mhz

Feature:

1.The antenna 55cm, LORA antenna outdoor omnidirectional fiberglass antenna LTE outdoor long-distance receiving antenna

The antenna has an N SMA connector cable, so it can be easily connected to the gateway and all other helium miners.

2.The antenna can be used in any environment that requires a long-distance LoRa connection, for agriculture, environmental monitoring, and urban monitoring

3. With two fixing clips, it can be more convenient to move the antenna installation

Low VSWR：

The VSWR of this antenna is 1.1, which is lower than other similar antennas (the closer the VWSR is to 1, the smaller the reflection and the better the match of the antenna )

How to choose dBi？

Lower dBI: Great performance on uneven terrains, or areas with a high hotspot density.

Higher dBI: Great performance on flat terrain and low hotspot density.

Middle dBI: Perfect for those eniorments that fall in between the other enviorments described above.

What is Rated gain and maximum gain?

Rated gain refers to the stable value that the antenna can achieve under normal circumstances, and the maximum gain refers to the maximum value that can be achieved under the lowest loss and the best environment, but this value is not a fixed value, and the gain is often fluctuating.

Specification:

Brand: STARF

Connector: N-Male

Polarization: vertical polarization

Frequency: 860-930MHz (EU868， US915)

Rated Gain：8dbi

Maximum gain: 12dbi (not a fixed value)

Standing wave ratio: 1.9 (dB)

Cable：RG58

Cable parameters: single core wire

Cable outer diameter: 4.95+-5mm

Cable material: PVC outer quilt

Wire Type: High Braid Shield

Impedance: 50 ohm

Material: Fiberglass

Connector material: copper

Working temperature: -40~+85 degrees Celsius

Length: 550mm

Relative humidity: up to 95%

Packing list:

1 * Antenna Kit（As the Picture Show）

Note:

Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Manual measurement, please allow 1-10mm error. Thanks for your understanding.